F3E-Therm thermostatic mixer DN 15 as finished installation kit for in-wall installation in basic installation kit, for shower facilities. Electronically controlled, for connection to hot water and cold water. Function block with integrated solenoid valve cartridge and thermostat, with metal handle with adjustable and turn-proof temperature stop and option for manual thermal disinfection. All-metal construction, visible parts high-polished chromium-plated. With 6 V lithium battery (CR-P2), holding frame with profile seal, stainless steel cover plate 190 x 245 mm with covered screw fixing including touch sensor with control electronics, rosette, backflow preventer and strainers. Depth adjustability 25 mm. Activated water hygiene flushing 24 hours after last activation and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control.

Type of mounting In-wall installation with box
Type of operation Sensor operation
Power supply connection Battery 6-V
Position of water connection From side
Diameter nominal DN 15
Calculation flow rate cold water 0.15 liter per second
Calculation flow rate hot water 0.15 liter per second
Functional principle Electronic self-closing
Minimum flow pressure 1.00 bar
Volume flow rate at 3 bar 0.23 liter per second
Inlet size G-3-4-B
Type of mixing Thermostat
Adjustable flow time Yes
Material casing Stainless steel
Material fitting Brass
Sound insulation No
Surface finish casing Satin finished
Surface finish fitting Chromed
Thermal disinfection Manual
Protective shutdown Yes
Default automatic hygiene flushing 24h after the last activity
Maximum flow time 255.00 seconds
Minimum flow time 1.00 seconds
Default flow time 30.00 seconds
Type of sensor Opto-electronic sensor
Circulation No
Additional connections No
Connection with pay water dispenser Not possible
Shower pipe draining No
Type of shower In-wall fitting
ATT-WS-TYPEWATCON 20181231.00000